SCREW

SCREW

Product Description:

The Maserati part number 83035600 screw is a hex head screw that is used to secure the rear seat belt buckle assembly in Maserati GranCabrio vehicles. It is a metric screw with a thread size of M6 x 1.00 and a length of 16 millimeters. The screw is made of steel and has a zinc plating to protect it from corrosion.

The rear seat belt buckle assembly is located in the center of the rear seatback. It is held in place by two screws, one on each side. The 83035600 screw is one of these screws. The other screw is part number 83035599.

If the 83035600 screw is loose or missing, the rear seat belt buckle assembly may not be properly secured. This could increase the risk of injury in the event of a crash. Therefore, it is important to make sure that this screw is in good condition and properly tightened.

Here are some tips for replacing the 83035600 screw:

1. Make sure that the vehicle is in Park and the parking brake is engaged.
2. Remove the back seat cushions.
3. Locate the rear seat belt buckle assembly.
4. Remove the old screw using a socket wrench or an Allen wrench.
5. Apply a thin layer of thread sealant to the new screw.
6. Screw the new screw into place by hand until it is snug.
7. Tighten the screw using a socket wrench or an Allen wrench.
8. Replace the back seat cushions.

It is important to use the correct size and type of screw when replacing the 83035600 screw. Using the wrong screw could damage the rear seat belt buckle assembly or make it difficult to secure the assembly in place.

At Scuderia Car Parts, we strive to find the exact part you need for your car. If you have any enquiry about this part, feel free to contact our knowledgeable team.

This car part is suitable for the following models:
GranCabrio (2010-2012), GranCabrio (2011-2012) Sport, GranCabrio (2013+), GranCabrio (2013+) Sport, GranCabrio (2013-2015) MC and 3 other model(s). See fitment details for more information.